• Home
  • /
  • Blog
  • /
  • The Relay Testing Handbook Updates

The Relay Testing Handbook Updates

Our publishing model allows us to quickly correct errors or omissions and implement suggestions. Please contact us at [email protected] to report a problem. If we implement your suggestion, we’ll send you an updated copy and/or a prize. If you purchased a digital pdf from the ValenceOnline.com or RelayTraining.com store, contact us at [email protected] to get an updated copy.
[thrive_toggles_group”][thrive_toggles title=”The Relay Testing Handbook: Principles and Practice” no=”1/10″]

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter or see the letter a, b, c, d, e, f, h, i, j, or k:

  • The formulas in Figure 1-61 and 1-62 were corrected.
  • Figure 13-2 was updated to include phase angles.
  • The 480V/247V designation below Figure 1-33 on page 32 was changed to 480V/277V.

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter or see the letter a, b, c, d, e, f, or g:

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter or see the letter a, b, c, d, e, or f:

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter, or see the letter a, b, c, or d:

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter, or see the letter a, b or c:

These corrections apply if you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter, or see the letter a or b:

If you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter, these corrections apply:

If you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter or see the letter “a”, these corrections apply:

[/thrive_toggles]

[thrive_toggles title=”The Relay Testing Handbook: Simplified Motor Relay Testing” no=”10/10″]

These corrections apply to your pdf download if you downloaded your copy before 2020/08/19:

  • Page 72: Section “g) Apply a No-Op State Outside the Expected Tolerance” has been changed to “g) Apply an Op State Outside the Expected Tolerance”

[/thrive_toggles]

[thrive_toggles title=”The Relay Testing Handbook: Generator Protection Relay Testing” no=”10/10″]

If you look at the lower right hand corner of the copyright page along the same horizontal line as “Printed in the United States of America” and don’t see a letter or see the letter “a”, these corrections apply:

  • Page 123: V3 (Polarity) G1_TS-AC-2(7) changed to V3 (Polarity) G1_TS-AC-2(5)

[/thrive_toggles]

[/thrive_toggles_group]

 Did you like this post?

You can share it with these links:

Share 0
Share 0
Tweet 0
Author Image

About the Author

Valence Announcements 

Chris is an Electrical Engineering Technologist, a Journeyman Power System Electrician, and a Professional Engineer. He is also the Author of The Relay Testing Handbook series and founder of Valence Electrical Training Services. You can find out more about Chris here.

Read More Articles:

What is DC Offset? Ask Chris

Get NETA CTDs for All of Our Online Courses

Leave a Reply

Your email address will not be published.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}