This post is pretty old. I suggest you check this post to get a better idea of my thoughts on test-sets. https://relaytraining.com/what-is-the-best-protective-relay-test-set/ I understand Chris has a Manta MTS-5000, do you like it! Does anyone else has info on the Manta? What about other test equipment? Thanks for any info you
The DC Power supply to the relay quit in the middle of a setting download and when the power was restored, the relay EEprom failed. I was able to communicate with the relay (at a different BAUD rate) and the SEL Tech support had me go to level 2 and
This was a nice surprise for me. Older versions of the SR-745 have a maximum voltage of 200kV. If you use newer software to set the relay, it indicates a maximum voltage of 2000.0 kV. If a voltage setting higher than the maximum is uploaded, the relay automatically divides all
http://www.beckwithelectric.com/ Beckwith M-3425 Generator protection Cable: 9-pin to 9-pin RS-232 Null Modem Software: 3820A IPScom Communications Software Software Default Settings PC Port: Com1 (Varies by Computer) Baud Rate: 9600 Echo Cancel: Not Selected Access Code: Default Address: 1 Make sure that the screen is blank and you have completely exited
Basler GPS100 Relay Cable: 9-pin to 9-pin RS-232 Straight through Software: Basler Bestcomms software for GPS100 Software Default Settings Comm Port: 1 Varies by Computer (Doesn’t seem to work with Comm 2) Baud Rate: 9600 Parity: None Data Bits: 8 Stop Bits: 1 Show Commands During Transfer: Off
MIF: Cable: 9-pin to 9-pin RS-232 Straight Through Software: GE_NESIS M+PC – Software Default Settings Connection: Baud Rate: Direct Connection Port: 1 (Varies by computer) Parity: No Parity Data Bits: 8 Stop Bits: 1 Passwords & Connection Info Software Username: “” (Blank) Password: 7169 Slave Address: 1 Unit Password: 1
Page [tcb_pagination_current_page] of [tcb_pagination_total_pages]