Sign up for an online training program you can take any time and any where you have an internet connection.
Showing all 5 results
-
Choose Your Relay Testing Fundamentals Online Training Programs In One Place
All the online theory and practical information we offer at once.
Get instant access to the entire relay testing fundamentals series that will give you the basic knowledge that will allow you to test any element in any relay/IED with any test-set:
- Fundamentals #1: Phasor Drawings for Relay Testers Course (Approx. 4 Hours of Lectures, Lessons, and Quizzes)
- Fundamentals #2: How to Test Overcurrent Relays Online Seminar (Over 32 Hours of Videos)
- Fundamentals #3: How to Test Protective Relays Online Seminar (Over 16 Hours of Videos)
- Fundamentals #4: How to Test Voltage Elements Inside IEDs/Relays (Over 13 Hours of Videos & 16 CEUs)
Fundamentals #1) The Phasor Drawings for Relay Testers Online Course – which helps relay testers understand the building blocks of every relay test, and convert between the FOUR different phase angle systems used in the protection and control (P&C) world. Your test-set and relay probably use two different phase angle systems.
Fundamentals #2) The How to Test Overcurrent Relays: An Introduction to Protective Relaying Online Seminar – which uses electro-mechanical and solid state overcurrent relays to help you understand relays, CTs, and how to apply the four fundamental tests that can be applied to any element inside any relay with any test-set. (Ramping pickup tests, pulsing pickup tests, timing tests, dynamic timing/pickup tests) You also learn how to perform the electrical and mechanical tests on an electro-mechanical relay.
Fundamentals #3) The How to Test Protective Relays/IEDs Online Seminar – which shows you what you should be testing inside an IED/Relay (Hint: standard element testing won’t find the most common problems) and how to apply those four fundamental tests to modern digital IEDs/Relays…without changing settings! This seminar will help you:- understand why you are testing,
- what you should be testing,
- learn how to get green checkmarks on your test report that actually matter, and
- how to troubleshoot problems.
Fundamentals #4) The How to Test Voltage Protection in IEDS/Relays Online Training Seminar – which shows you how to connect, understand, and test Over- and Under-Voltage elements in IEDs/Relays with Wye, Open-Delta, and Broken Delta connections. This seminar also sets you up to test more advanced element tests with detailed information about three-phase, phase-to-phase, and phase-to-ground faults and symmetrical components.
Do you want to enroll more than one person into our online training courses? No problem!
Go to our Team Registration Page at the Valence Training Academy
Click Here To Buy Courses For Multiple Students or Another Person
Do you want to purchase courses for yourself?
Make your selections below and click “Add to cart”
-
Fundamentals #2: How to Test Overcurrent Relays: An Introduction to Protective Relaying Online Seminar (32 NETA CTDs)
Are you new to relay testing? Do you want to create a solid foundation before you get thrown to the wolves?
Have you been thrown to the wolves already and don’t feel confident in your relay testing skills?
If so, this seminar covers the basics of overcurrent protection that new relay testers should know before they start testing relays. It also fills in gaps for self-taught relay testers who had to figure it out for themselves. No matter which situation you are in, if you want to truly understand how to test all overcurrent relays from any manufacturer with any test-set, this is the training you’ve been looking for. We’ve created over 30 hours of short videos that show you how to test any overcurrent relay from any relay manufacturer with your test-set.
Get your questions answered inside these lessons:
- Introduction to Protective Relays
- How to Test Electro-Mechanical Overcurrent Relays
- Understanding Power System Faults
- How to Test Simple Digital Overcurrent Relays
- Introduction to the Power System Studies Used to Create Relay Settings
- How to Test Overcurrent Elements Inside IEDs
This course is eligible for 32 NETA Continuing Technical Development Credits (CTDs). NETA Certified Technicians (Level III and Level IV) are required to earn a minimum of 48 CTDs every three years to maintain their certification. For more information about the CTD program and requirements, please contact the NETA office at neta@netaworld.org or 888-300-6382.
Do you want to enroll more than one person into our online training courses? No problem!
Go to our Team Registration Page at the Valence Training Academy
Click Here To Buy Courses For Multiple Students or Another Person
Click the “Add to cart” Button Below To Purchase This Course For Yourself!
-
Fundamentals #3: How to Test Protective IEDs (Relays) Online Seminar (16 NETA CTDs)
This online protective relay testing seminar follows Chris Werstiuk (author of The Relay Testing Handbook) as he shows you the basic skills you need to test any digital relay with any modern test-set. Learn how to test protective relays with online videos that are broken down into logical chunks that you can watch at any time and in any order so that you can fit this series into your busy schedule.
Sign up today and earn 16 NETA CTDs!
Do you want to enroll more than one person into our online training courses? No problem!
Go to our Team Registration Page at the Valence Training Academy
Click Here To Buy Courses For Multiple Students or Another Person
Click the “Add to cart” Button Below To Purchase This Course For Yourself!
-
Fundamentals #4: How to Test Voltage Elements Inside IEDs/Relays (16 NETA CTDs)
The How to Test Voltage Protection in IEDS/Relays Online Training Seminar is the last seminar in our Relay Testing Fundamentals Online Training program– which shows you how to connect, understand, and test Over- and Under-Voltage elements in IEDs/Relays with Wye, Open-Delta, and Wye/Broken Delta connections. This seminar also sets you up to test more advanced element tests with detailed information about three-phase, phase-to-phase, and phase-to-ground faults and symmetrical components.
This new seminar has the following lessons:
- Lesson 1: Introduction to Voltage Transformers (PTs or VTs)
- Lesson 2: How to Test OverVoltage (59-Element) Protection Inside an IED/Relay
- Lesson 3: Symmetrical Components for Relay Testers
- Lesson 4: How to Test UnderVoltage Elements (27)
- Lesson 5: How to Test IEDs/Relays With Delta PT Connections
- Lesson 6: How to Test IEDs/Relays With Wye/Broken-Delta VT Connections
This course is eligible for 16 NETA Continuing Technical Development Credits (CTDs). NETA Certified Technicians (Level III and Level IV) are required to earn a minimum of 48 CTDs every three years to maintain their certification. For more information about the CTD program and requirements, please contact the NETA office at neta@netaworld.org or 888-300-6382.
-
Fundamentals #1: Phasor Drawings for Relay Testers Course (4 NETA CTDs)
Waveform diagrams contain every detail of an electrical system, but that information can be difficult to understand without a lot of effort. Phasor drawings take the complex information embedded in waveform drawings and convert it into phasor diagrams so that you can see the most important information about an electrical system at a glance. Understanding phasor drawings is probably one of the most important skills that a relay tester must have to be successful!
Take this course to learn these topics:
Understanding Phasors and Creating Phasor Drawings- What Are Phasors?
- How to Draw Phasor Diagrams
- Drawing Phasors with Different Scales
Create and Understand Phasor Diagrams Used by Different Relay and Test-Set Manufacturers
- Drawing Phasors with Lagging Angles (Megger and GE SR)
- Draw Phasors with Positive Angles (Doble and Manta Test Systems)
- Draw Phasors with Negative Angles (GE UR)
- Draw Phasors with Positive and Negative Angles (Omicron and SEL)
Do you want to enroll more than one person into our online training courses? No problem!
Go to our Team Registration Page at the Valence Training Academy
Click Here To Buy Courses For Multiple Students or Another Person
Click the “Add to cart” Button Below To Purchase This Course For Yourself!